New products

Two bio-mineral nutrients for the flowering stage. All micronutrients in the mineral part are chelated. The iron is a Fe-EDDHA chelate which enables the plant to use the iron in a wide range of pH values. The biological part contains more than 30 micronutrients, carbon hydrates, amino acids en a vegetable hormone which stimulates chlorophyll production.

Nutrients needed in relatively large quantities are called macronutrients and those needed in relatively small quantities are called micronutrients.Sweet Jane combines main nutrients with biological stimulants

Sweet Jane 1 for the first half of the flowering stage ( NPK 7-7-7 )
Sweet Jane 2 for the second half of the flowering stage ( NPK 2-4-9 )

( So it is not a 2-component nutrient nor a Grow and Flower nutrient. )

The maximum advised dosage for Sweet Jane 1 and 2 is 5 milliliter on 1 liter tap water for mature plants. Use half the dosage for for plants smaller than 30 centimeter. Use the nutrition with every watering.

A standard diagram does not take into account the many differences in substrates . Also the volume of soil influences the additionally required nutrients. Given sufficient good organic soil, you can grow without nutrition at all. Instead the following guidelines will help you to determine the right concentration.

With increased temperatures you must use less nutrients to prevent leaf burn.
If for some reason the plant slows down you must decrease the amount of nutriments.
More soil, means less nutriments.
If you start in rich soil you should water the plants without nutrients at all for at least the first two weeks. The usage of a leaf fertilizer is recommended in the first 10 days to ensure that all micronutrients are available to the seedling.

During the development, different ratios of nutrients are required by the plant. The first weeks the plant will still grow while the flower production is low. This changes during maturation.

Especially when growing on soil we run the risk of giving to much of one the elements N,P or K. Nutrients not used by the plant will remain in the soil. After time the EC (or TDS) value gets to high and salts build up in the soil. This is a disadvantage for the plant because it affects the ability to take up water. Also a large concentration of minerals in the substrate is harmful to the micro-life. This I why the right dosage of nutrients is important to prevent excess salt buildup. You need some foresight especially on soil because it is impossible to flush the nutrients without drowning the roots.

Roots take in water easily when the concentration of nutrients is low, a low EC value. The ion concentration in the plant cells remains higher than the surrounding substrate causing osmotic pressure. Water is pulled into the plant by this osmotic pressure. If the ion concentration surrounding the roots is higher ( high EC) than inside the plant cell, the plant has to make adaptations to be able to take in water. At this point the production looks fine, but the ability to take in water is largely reduced. Raising the EC any further will slow down the plants development.

In short: Feed it , don't store it.

This No Mercy GA-Special Spray can be safely applied to make plants bloom richer and produce more resin. This is an effect of Gibberelic-acid (a chemical produced acid, so not an hormone preparate) which stimulates the female hormones in the plant. Apply on healthy plants only, and only during the indicated period of bloom.

Preferably use the spray shortly before you turn off the lights. You can also hang the light higher for a few hours. A 250 ml. bottle of GA-Special Spray is enough to treat 125-150 plants. Spray well above the plants - do not dilute.

Spray the plants once after they have been blooming for 23 - 26 days, or 23 -26 days after you have switched the lights to 12 hours. For insiders: the change from the first to the second internode flowering is the best moment for treatment. The results will show up rapidly.

An extra week of after-blooming is necessary. In this last week, the plant will put on more weight than in 'regular' situations. Some plants react better to 11 hours of light during the last two weeks. Some extreme Sativa's may show a tendency to hermafroditism.

No Mercy Supply cannot be held responsible possible side effects due to the complex hormonal activity of this stimulato
 

This No Mercy GA-Special Spray can be safely applied to make plants bloom richer and produce more resin. This is an effect of Gibberelic-acid (a chemical produced acid, so not an hormone preparate) which stimulates the female hormones in the plant. Apply on healthy plants only, and only during the indicated period of bloom.

Preferably use the spray shortly before you turn off the lights. You can also hang the light higher for a few hours. A 250 ml. bottle of GA-Special Spray is enough to treat 125-150 plants. Spray well above the plants - do not dilute.

Spray the plants once after they have been blooming for 23 - 26 days, or 23 -26 days after you have switched the lights to 12 hours. For insiders: the change from the first to the second internode flowering is the best moment for treatment. The results will show up rapidly.

An extra week of after-blooming is necessary. In this last week, the plant will put on more weight than in 'regular' situations. Some plants react better to 11 hours of light during the last two weeks. Some extreme Sativa's may show a tendency to hermafroditism.

No Mercy Supply cannot be held responsible possible side effects due to the complex hormonal activity of this stimulator.
 

With this package of No Mercy Bacterial you now own a freeze-dried culture of micro-organisms. If you mix the content of this package with water billions of nitrifying bacteria will grow within a period of 24 hours. Tiny as they may be, these nitrifying bacteria are essential to all life on earth, including plants. Together with enzymes and moulds these bacteria transform organic waste into re usable nutrients for the plants. Not only does No Mercy Bacterial stimulate growth, but since nitrifying bacteria are real devourers of waste you can also reduce the rinsing of your growth medium. Bacterial can be used in both Hydro-systems and Bio-systems.

Application in Hydro-systems:
No Mercy Bacterial needs about 24 hours to develop the maximum amount (billions) of bacteria. You can put Bacterial directly into the barrel of your hydro-system or prepare the culture separately in a bucket (10 L.) of water (Ph 5.8-7) at room temperature and put this water in the barrel after 24 hours. One or two teaspoons is enough though overdosing is not troublesome. The fertilizing schedule can remain unchanged and No Mercy Bacterial can be added when considered necessary. A regular, weekly application of Bacterial will give best results. Keep an eye on the barrel's filter when adding the Bacterial mix because watering systems risk clogging-up by the remains of the medium the bacteria originally lived in. No Mercy Bacterial is also ideal for rinsing your slabs, you will create a healthier environment for your plants. If you must use a fungicide, use Bacterial afterwards to restore the environment. Do not use a fungicide shortly after the application off No Mercy Bacteria since this will probably kill the bacteria you need so much.

Application in Bio-systems:
The usual and easiest way to add Bacterial is by mixing it with the irrigation water. Mix one or two teaspoons in a bucket of water (Ph 6.2 - 7 ), wait 24 hours and apply. It is also possible to mix the freeze-dried bacteria with the growth medium for your plants. A weekly application of Bacterial will give optimal results.



 

With plastic scalpel blade.

Make the motherplant strong = making clones strong ! Metrop MAM highest concentrated liquid motherplant fertiliser. Metrop Hydroponics MAM motherplant fertilizer is a unique product. The Metrop Hydroponics MAM fertilizer is formulated to supply motherplants with essential nutrients. The NPK and micro-elements balance in the Metrop MAM motherplants fertilizer is specially composed to produce the highest possible clone production from the plant. The raw materials of the Metrop Hydroponics MAM motherplant fertilizers are of a very high purity, which makes it possible to achieve a high NPK proportion without disturbing the plant.

Metrop Hydroponics MAM motherplants fertilizer also includes organic material derived from a single seaweed variety which has proven beneficial effects upon plants by stimulating root and grow development and helps recovering the plant after cutting.

Metrop Hydroponics MAM motherplant fertilizer will make the motherplants strong so the cutlings will be stronger and more healthy, and can be store longer. Metrop Hydroponics MAM can be given to the medium and give as a foliar. Give also Metrop Calgreen fertilizer to the motherplants !!

Metrop Hydroponics MAM motherplant fertilizer is a high-quality plant nutrient with all macro- and microelements required by plants from which cuttings are constantly taken.

Assures sufficient availability of phosphorus for continuous growth of the roots;
Assures sufficient availability of magnesium for an optimum chlorophyll and protein synthesis;
Assures a cutting with more growth reserves;
Contains additional micro elements to eliminate a shortage caused by cutting;
Contains Kelpak for an optimum stimulation of growth;
it consists only of the purest raw materials;

 

Calcium is the 4th important element for a plant, and your plant want liquid Calcium a lot ! The Metrop Hydroponics Calgreen calcium fertilizer is a unique product. The basis of the product is Nitrogen and Calcium in a specific compound. This compound is a building block for the plant cell walls, which results in a more compact, heavier flowers. Metrop Hydroponics Calgreen calcium fertilizer also provides 80% protection against most moulds and rot diseases. Extra Calcium in the medium ensures that the ions of other nutritional elements are released more easily from the colloidal particles and the plant therefore has more nutritional building blocks available. Metrop Hydroponics Calgreen calcium fertilizer is produced from of very high quality raw materials and can be mixed with any Metrop Hydroponics product.

• Visibly improves the absorption of nutrients at the root;
• Assures a tangible strengthening and toughening of the top;
• Assures a measurable increase in the mass of the end product;
• Assures the availability of sufficient magnesium for optimal chlorophyll and protein synthesis;
• It consists only of the purest raw materials. Therefore use with a low EC;

The more potassium to a fruit or flower, the fatter the fruit of flower ! For the largest volume increase, twice the potassium than phosphorus !! In the Metrop Hydroponics MR2 flower fertilizer, the NPK and micro-elements balance is specially composed to produce the highest possible yield.

The raw materials of Metrop Hydroponics MR2 bloom fertilizer is of very high purity, which makes it possible to achieve a high NPK proportion without disturbing the plant. The quality of the raw materials ensures that it will never clog the vat or irrigation system. Once prepared with water, the EC will remain stable.

The micro elements are also added to a higher and purer degree, so that the plants have a faster and better photosynthesis, which is beneficial for the quality of the end product. Metrop Hydroponics MR2 flower fertilizer is a high-quality plant extract containing all macro and micro nutrients required for full top bloom in any medium.
 

• Visibly improves the condition of the plant's top;
• Assures the availability of sufficient potassium to allow the top to reach its full growth;
• Assures the availability of sufficient phosphorus for a continued growth of the roots;
• Assures the availability of sufficient magnesium for optimal chlorophyll and protein synthesis;
• Is adapted to an optimal bloom explosion;
• Does not contain any harmful dyes and is not diluted with water: it consists only of the purest raw materials. Therefore use with a low EC.

The very high purity raw materials of bio minerals Metrop Hydroponics MR1 grow fertilizer are making it possible to achieve a high NPK proportion without disturbing the plant.
The quality of these raw materials will clog never in the vat or irrigation system. Once prepared with water, the EC will remain stable.

Use:
In nutrient-rich soils give this mixture 1 to 3x per week, nutrient-poor soils or on hydro cultivation give daily. Water every day as needed. Beware of overdose.

This product should be stored in a dark and frost-free.
With eye contact in concentrated form, rinse eyes immediately with water.